Saltar al contenido principal

Introducción

If your LeapFrog Scribble and Write won't power on, there may be an issue with the batteries. Your batteries may be drained and in need of replacing, or the battery compartment could have a buildup of debris (dirt, dust, etc.) preventing the batteries from working properly.

  1. Use a Phillips head screwdriver to remove the screw from the battery compartment on the back of the toy.
    • Use a Phillips head screwdriver to remove the screw from the battery compartment on the back of the toy.

  2. Remove the back cover from the device. Remove the batteries from the toy.
    • Remove the back cover from the device.

    • Remove the batteries from the toy.

  3. In a small cup, combine a little baking soda and water to create a pasty solution.
    • In a small cup, combine a little baking soda and water to create a pasty solution.

  4. Using the baking soda solution and a cotton swab, clean the metal terminals.
    • Using the baking soda solution and a cotton swab, clean the metal terminals.

  5. Wipe the metal terminals and the toy clean using a soft, dry towel.
    • Wipe the metal terminals and the toy clean using a soft, dry towel.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Anthony Kidd

Miembro Desde 10/02/16

233 Reputación

2 Guías creadas

Equipo

USF Tampa, Team 1-5, Nance Spring 2016 Miembro de USF Tampa, Team 1-5, Nance Spring 2016

USFT-NANCE-S16S1G5

3 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 3

Todo El Tiempo: 302