Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Orient the tablet so it’s laying screen down and the barcode sticker is facing up.
-
Remove the barcode sticker to expose the two screws.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using the iFixit opening tool, pry off the purple and white child-proof casing to expose the twelve screws.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove all twelve 7mm Phillips #1 screws located along the edges of the device.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the purple case, exposing the motherboard and battery.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the Spudger to remove the glued down battery.
-
Using your fingers, grab the battery wires and carefully unplug them from the motherboard.
-
Replace the battery with a new one.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the three ribbon cables on top of the motherboard.
-
Flip up the locking clip on the ribbon cable connector to release the cable.
-
Disconnect the cables from their connectors.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the four 5.0 mm Phillips #0 screws securing the motherboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the motherboard up to expose the fourth ribbon cable underneath.
-
Flip up the locking clip to release the cable and disconnect the cable from the connector.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the headphone jack on the bottom right corner of the motherboard.
-
Use a soldering iron to desolder the five metal connections to the motherboard.
-
Replace the headphone jack.
-