Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

LeapFrog LeapPad Ultimate Back Panel Replacement

Introducción

Steps on how to open up the back of a LeapFrog LeapPad Ultimate.

Qué necesitas

  1. LeapFrog LeapPad Ultimate Back Panel Replacement, Back Panel: paso 1, imagen 1 de 2 LeapFrog LeapPad Ultimate Back Panel Replacement, Back Panel: paso 1, imagen 2 de 2

    • Flip over the Pad to its back side to begin the removal of the back panel.

    • Begin by removing the blue rim along the edge of the device. It runs along the green silicone lining.

    • This is very difficult to remove , so do be patient. To help remove the seal, both a metal spudger and plastic opening tool may be used.

    • Remove the pen from its place before starting to avoid tangling.

    Traducir

  3. LeapFrog LeapPad Ultimate Back Panel Replacement: paso 2, imagen 1 de 2 LeapFrog LeapPad Ultimate Back Panel Replacement: paso 2, imagen 2 de 2

    • Once the blue rim is removed, the 12 screws will be visible.

    • Use the Phillips #1 screwdriver to unscrew all 12 screws.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 2

Ultimos 30 días: 15

Todo El Tiempo: 1,190