Saltar al contenido principal

Introducción

If there is no sound coming from your device there is a good chance your speakers are broken. This guide will show you how to replace the speakers in the Leader Impression i10A-LE tablet.

Partes

No se especificaron partes.

  1. Leader Impression i10A-LE Speakers  Replacement, Speakers: paso 1, imagen 1 de 1
    • Start with your Leader Impression i10A-LE with the word "Impression" closest to you and the camera in the top left corner.

  2. Leader Impression i10A-LE Speakers  Replacement: paso 2, imagen 1 de 3 Leader Impression i10A-LE Speakers  Replacement: paso 2, imagen 2 de 3 Leader Impression i10A-LE Speakers  Replacement: paso 2, imagen 3 de 3
    • Start by prying the back off by using plastic opening tools

    • Using the plastic tools slide the flat end into the device.

    • Gently pry the back piece until you hear a popping noise.

    • Once the back is loose, remove it from the device and set aside.

  3. Leader Impression i10A-LE Speakers  Replacement: paso 3, imagen 1 de 3 Leader Impression i10A-LE Speakers  Replacement: paso 3, imagen 2 de 3 Leader Impression i10A-LE Speakers  Replacement: paso 3, imagen 3 de 3
    • Use the spudger to pry both of the speakers from the tablet.

    • Follow both sets of speaker wires to the motherboard where they are connected.

    • Desolder the wire connections from the motherboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

jcg

Miembro Desde 14/11/16

101 Reputación

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 111