Repara tus cosas Comunidad Tienda

Leader Impression i10A-LE Microphone Replacement

Introducción

Removing and replacing the microphone for the Leader Impression i10A-LE.

Qué necesitas

  1. Leader Impression i10A-LE Microphone Replacement, Microphone: paso 1, imagen 1 de 1

    • Orient your Leader Impression i10A-LE with the word "Impression" closest to you and the camera in the top left corner.

    Editar

  3. Leader Impression i10A-LE Microphone Replacement: paso 2, imagen 1 de 3 Leader Impression i10A-LE Microphone Replacement: paso 2, imagen 2 de 3 Leader Impression i10A-LE Microphone Replacement: paso 2, imagen 3 de 3

    • Pry the back off by using plastic opening tools.

    • Using the plastic tools slide the flat end into the device.

    • Gently pry the back piece until you hear a popping noise.

    • Once the back is loose, remove it from the device and set aside.

    Editar

  4. Leader Impression i10A-LE Microphone Replacement: paso 3, imagen 1 de 2 Leader Impression i10A-LE Microphone Replacement: paso 3, imagen 2 de 2

    • Disconnect the positive and negative battery leads.

    • Remove the microphone from plastic housing with the tweezers.

    • Desolder the positive (red) and negative (black) power leads.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 108