Saltar al contenido principal

Leader Impression i10A-LE Battery Pack Replacement

Qué necesitas

  1. Leader Impression i10A-LE Battery Pack Replacement, Battery Pack: paso 1, imagen 1 de 1
    • Start with your Leader Impression i10A-LE with the word "Impression" closest to you and the camera in the top left corner.

  2. Leader Impression i10A-LE Battery Pack Replacement: paso 2, imagen 1 de 3 Leader Impression i10A-LE Battery Pack Replacement: paso 2, imagen 2 de 3 Leader Impression i10A-LE Battery Pack Replacement: paso 2, imagen 3 de 3
    • Use the plastic prying tools to crack open the back of the device.

    • Once cracked, use more plastic prying tools to fully remove the back panel. A popping noise will occur when each clip is opened.

    • Remove the back panel and set aside.

  3. Leader Impression i10A-LE Battery Pack Replacement: paso 3, imagen 1 de 2 Leader Impression i10A-LE Battery Pack Replacement: paso 3, imagen 2 de 2
    • The battery pack is glued to the device.

    • Use a spudger to pry the battery pack from the glue.

    • Desolder the positive (red) and negative (black) power leads.

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 563