Repara tus cosas Comunidad Tienda

Leader Impression i10A-LE Back Facing Camera Replacement

Introducción

This replacement guide will teach you how to remove and replace the back facing camera to your Leader Impression i10A-LE tablet. This fix can take anywhere from 15-25 minutes.

Qué necesitas

  1. Leader Impression i10A-LE Back Facing Camera Replacement, Back Facing Camera: paso 1, imagen 1 de 2 Leader Impression i10A-LE Back Facing Camera Replacement, Back Facing Camera: paso 1, imagen 2 de 2

    • Start with your Leader Impression i10A-LE with the word "Impression" closest to you and the camera in the top left corner.

    Traducir

  2. Leader Impression i10A-LE Back Facing Camera Replacement: paso 2, imagen 1 de 3 Leader Impression i10A-LE Back Facing Camera Replacement: paso 2, imagen 2 de 3 Leader Impression i10A-LE Back Facing Camera Replacement: paso 2, imagen 3 de 3

    • Start by prying the back off by using plastic opening tools.

    • Using the plastic tools slide the flat end into the device.

    • Gently pry the back piece until you hear a popping noise.

    • Once the back is loose, remove it from the device and set aside.

    Traducir

  4. Leader Impression i10A-LE Back Facing Camera Replacement: paso 3, imagen 1 de 3 Leader Impression i10A-LE Back Facing Camera Replacement: paso 3, imagen 2 de 3 Leader Impression i10A-LE Back Facing Camera Replacement: paso 3, imagen 3 de 3
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar

    • Once the back is off, locate the back facing camera.

    • The camera will be in the top left corner.

    • Using the precision tweezers that are bent, gently grab the strip below the camera.

    • slowly lift up until the camera lifts from its spot.

    Traducir

  5. Leader Impression i10A-LE Back Facing Camera Replacement: paso 4, imagen 1 de 3 Leader Impression i10A-LE Back Facing Camera Replacement: paso 4, imagen 2 de 3 Leader Impression i10A-LE Back Facing Camera Replacement: paso 4, imagen 3 de 3

    • Continue slowly lifting with the bent precision tweezers.

    • The bottom half of the camera strip will pop out.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 4

Ultimos 30 días: 10

Todo El Tiempo: 203