Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert metal spudger between front and back panel to pry apart.
-
Continue to pry while moving the metal spudger along the crevice to completely separate two panels.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the plastic opening tool to disconnect the flat ribbon cable from the motherboard connector.
-
Disconnect the flat ribbon by gently pulling it out from its connecting port.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the plastic opening tool to disconnect the display cable from its motherboard connector.
-
Disconnect the display cable by gently pulling it out from its connecting port.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip the tablet so the screen is facing upward, and use the metal spudger to pry apart the screen from the side pieces.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift and carefully remove the LCD display from the front cover.
-