Saltar al contenido principal

Introducción

In this guide, you will be shown step-by-step how to replace your Le Pan II charging port.

  1. Insert metal spudger between front and back panel to pry apart. Continue to pry while moving the metal spudger along the crevice to completely separate two panels.
    • Insert metal spudger between front and back panel to pry apart.

    • Continue to pry while moving the metal spudger along the crevice to completely separate two panels.

    • Avoid using metal when opening devices, as it can damage or crack the screen.

  2. Use the plastic opening tool to disconnect the flat ribbon cable from the motherboard connector. Disconnect the flat ribbon by gently pulling it out from its connecting port.
    • Use the plastic opening tool to disconnect the flat ribbon cable from the motherboard connector.

    • Disconnect the flat ribbon by gently pulling it out from its connecting port.

  3. Use the plastic opening tool to disconnect the display cable from its motherboard connector. Disconnect the display cable by gently pulling it out from its connecting port.
    • Use the plastic opening tool to disconnect the display cable from its motherboard connector.

    • Disconnect the display cable by gently pulling it out from its connecting port.

  4. Baterías para ordenadores portátiles

    Un pequeño arreglo para un gran resultado.

    Comprar Ahora

    Baterías para ordenadores portátiles

    Un pequeño arreglo para un gran resultado.

    Comprar Ahora
  5. Remove grey metal backing from screen.
    • Remove grey metal backing from screen.

  6. Flip the tablet so the screen is facing upward, and use the metal spudger to pry apart the screen from the side pieces.
    • Flip the tablet so the screen is facing upward, and use the metal spudger to pry apart the screen from the side pieces.

  7. Lift and carefully remove the LCD display from the front cover.
    • Lift and carefully remove the LCD display from the front cover.

  8. Use the Phillips 00 screwdriver head to unscrew the screws to the motherboard.
    • Use the Phillips 00 screwdriver head to unscrew the screws to the motherboard.

    • Reminder: There should be 8 (3.5 mm) screws to the motherboard.

  9. Use the Phillips 00 screwdriver head to  unscrew the screws to the fan.
    • Use the Phillips 00 screwdriver head to unscrew the screws to the fan.

    • Reminder: There should be 4 (1mm) screws to the fan.

  10. Use the metal spudger to pry off the charging port from the motherboard.
    • Use the metal spudger to pry off the charging port from the motherboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Kelly Moniz

Miembro Desde 20/10/16

501 Reputación

5 Guías creadas

Equipo

UMass Dartmouth, Team 6-3, Martin Fall 2016 Miembro de UMass Dartmouth, Team 6-3, Martin Fall 2016

UMASSD-MARTIN-F16S6G3

3 Miembros

10 Guías creadas

I have had no luck getting in touch with anyone in the customer service department.I have left several messages but have not heard from anyone yet. I just need to know how I can get a charge port for my daughters tablet. She had it 6 months before the charge port went out.

tashiarmarshall - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 7

Todo El Tiempo: 821