Introducción
If the filter in the fan is dirty and needs to be replaced, use this guide to learn how to dissemble the top part of the fan and replace your filter.
Qué necesitas
-
-
On the backside of the fan, remove the top two 4mm Phillips #Y1 screws using PH 1 bit and Magnetic Driver
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Equipo
UC Davis, Team S11-G2, Lore Fall 2018 Miembro de UC Davis, Team S11-G2, Lore Fall 2018
UCD-LORE-F18S11G2
4 Miembros
1 Guía escrita
Un comentario
Thank you for taking the time to do this. A great little guide for a fan that doesn't have a lot of support. Most details are looked over in online guide material. But this one was done with professional care.
Sincerely,
Davis Steffens
Seattle, WA
davissteffens@hotmail.com
PS: I Fix-It represents more than a company providing a service. I think you are reminding everyone that we have the right to Fix. Which in these weird times is a step needed.
