Repara tus cosas Comunidad Tienda

Lasko 20" Wind Machine Blade Replacement

Introducción

This is my guide on how to open a 20” Lasko Wind Fan to remove or replace the blade. This guide can increase the life of the fan. It also shows you how to access the inside of the fan to clean it. This is helpful for dust build up, and prolonging the life of your fan. Also, replacing the blade can increase the life span. Be sure to turn off and unplug this device before cleaning or placing your inside of it.

Qué necesitas

  1. Lasko 20" Wind Machine Blade Replacement, Blade: paso 1, imagen 1 de 1

    • Unplug the power cord.

    Editar

  2. Lasko 20" Wind Machine Blade Replacement: paso 2, imagen 1 de 3 Lasko 20" Wind Machine Blade Replacement: paso 2, imagen 2 de 3 Lasko 20" Wind Machine Blade Replacement: paso 2, imagen 3 de 3

    • Wipe off and dust the front and back grill of the fan.

    Editar

  4. Lasko 20" Wind Machine Blade Replacement: paso 3, imagen 1 de 3 Lasko 20" Wind Machine Blade Replacement: paso 3, imagen 2 de 3 Lasko 20" Wind Machine Blade Replacement: paso 3, imagen 3 de 3

    • Use the Phillips #0 screwdriver to remove four 8.8 mm screws that are marked on the back of the grill.

    Editar

  5. Lasko 20" Wind Machine Blade Replacement: paso 4, imagen 1 de 2 Lasko 20" Wind Machine Blade Replacement: paso 4, imagen 2 de 2

    • Unlatch the top of the fan to separate the grill and reveal the blade.

    Editar

  6. Lasko 20" Wind Machine Blade Replacement: paso 5, imagen 1 de 2 Lasko 20" Wind Machine Blade Replacement: paso 5, imagen 2 de 2

    • Grab both sides of the blade and twist counter clockwise to remove it from the base axel attached to the back grill.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

3 comentarios

Recherche moteur lasko windmachin 3300

Boso de la pascuala - Contestar

Recherche moteur lasko windmachine 3300

Boso de la pascuala - Contestar

Grip n twist is not as simple.

Then whatcafter removing? Stopped working n cleaned still not starting. What next after blade removal?

Dawn S - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 9

Ultimos 30 días: 46

Todo El Tiempo: 2,742