Partes

No se requieren partes.

Turn the phone onto its side so the label micro SD is facing upside down.
  • Turn the phone onto its side so the label micro SD is facing upside down.

  • Once on its side, lift the micro SD cover up and swivel it away from the opening.

Agregar Comentario

The Micro SD card will appear as a thin plastic piece sticking out of the phone Gently push down on the card, you should hear a click, and then it will "spring" back at you.
  • The Micro SD card will appear as a thin plastic piece sticking out of the phone

  • Gently push down on the card, you should hear a click, and then it will "spring" back at you.

  • The card should be sticking out of the phone slightly once this is done.

  • Remove the card from the slot

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Michelle

Miembro Desde 10/04/12

17 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 17-26, Amido Spring 2012 Miembro de Cal Poly, Team 17-26, Amido Spring 2012

CPSU-AMIDO-S12S17G26

4 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 304