Partes

No se requieren partes.

  1. Turn the phone off.
    • Turn the phone off.

    • Remove the back cover by sliding the tab away from the phone using one finger.

    Agregar Comentario

  2. Lift one side of the battery using a plastic opening tool or your fingers.
    • Lift one side of the battery using a plastic opening tool or your fingers.

    • Carefully remove the battery and set it aside.

    Agregar Comentario

    • When installing the battery, make sure to align the metal pins with those of the phone.

    Agregar Comentario

    • Turn your phone around and open the flip phone.

    • Locate the two grey rubber plugs on the LCD portion of the phone. These plugs cover up two screws.

    • Remove the two grey screw-covers at the bottom of the screen

    Agregar Comentario

    • Remove the screen by using the tab to eject the screen.

      • There is a gap between the case and the screen near the ear piece

      • Insert the plastic opening tool in the gap and pry the screen up.

    • The plastic screen cover is glued onto the phone, do not be alarmed if it may be difficult to pry it off.

    Agregar Comentario

    • Unscrew the four corner 3.21mm screws to separate the the top cover of the phone

    Agregar Comentario

    • Turn your phone around

    • Remove the top cover of the phone by inserting the plastic opening tool into the groove.

    • Carefully open the cover.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Stanley Thomas

Miembro Desde 20/01/12

38 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 8-16, Maness Winter 2012 Miembro de Cal Poly, Team 8-16, Maness Winter 2012

CPSU-MANESS-W12S8G16

4 Miembros

14 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 896