Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the 2 screw covers next to the rear speaker with a Push Pin.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the 4 cover screws with a Philips #00 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the iPod opening tool to pry off the back casing.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Continue sliding the iPod opening tool around the seam of the casing to separate the front and back casings.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the 2 screws from the back of the phone with a Phillips #00 Screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully lift up on the motherboard to see the ribbon cables underneath.
-
Use the spudger to carefully disconnect the ribbon cable from the motherboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the motherboard from the front casing by lifting straight up.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lay the phone with the screen facedown.
-
The 6 slider screws are visible.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Peel back but don't remove the blue tape to access the 2 center screws.
-
Remove the 6 slider screws with the Phillips #00 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the 2 screw covers next to the speaker with a push pin next to the camera.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the 6 screws with a Phillips #00 Screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the ipod opening tool to pry the screen casing and the slider mechanism apart from each other.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
With the slider mechanism separated from the screen casing the 8 screws securing the slider mechanism are visible.
-
Remove the 8 screws.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove slider mechanism. Now is a good time to clean slider mechanism if sticky.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.