Introducción

Replace damaged keypad.

Partes

No se requieren partes.

  1. Lay the phone face down with the screen in palm of hand.
    • Lay the phone face down with the screen in palm of hand.

    • Slide the grey button towards the top of the phone.

    Agregar Comentario

  2. While the button is slid up grab the battery on the sides and pull up with the bottom remaining in place.
    • While the button is slid up grab the battery on the sides and pull up with the bottom remaining in place.

    • Pull the battery up vertically to completely remove from phone.

    Agregar Comentario

    • Locate four screws underneath of the battery.

    • Remove screws by turning counter clockwise with screwdriver until they pop out.

    Agregar Comentario

    • Place fingers on bottom of phone near charger adapter and pry back half of bottom apart.

    • Note: There will be a significant amount of resistance.

    Agregar Comentario

    • Lift up logic board without completely removing from phone.

    • Remove entire keypad from beneath the logic board.

    Agregar Comentario

    • Insert replacement keypad with buttons aligned in proper holes.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Nichole Shaw

Miembro Desde 13/04/10

1 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 18-75, Johann Spring 2010 Miembro de Cal Poly, Team 18-75, Johann Spring 2010

CPSU-JOHANN-S10S18G75

4 Miembros

14 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 997