Saltar al contenido principal

LG VX6100 Keypad Replacement

Qué necesitas

  1. LG VX6100 Keypad Replacement, Back Cover: paso 1, imagen 1 de 1
    • Push down on the gray "PUSH" button on the back side of the phone.

    • Slide the back case downward. Then, lift and remove the case.

  2. LG VX6100 Keypad Replacement: paso 2, imagen 1 de 1
    • Lift up on the battery to remove it from the case.

  3. LG VX6100 Keypad Replacement: paso 3, imagen 1 de 1
    • Use a push-pin or tweezers to pry both of the tear-shaped screw covers out of the top of the phone.

  4. LG VX6100 Keypad Replacement: paso 4, imagen 1 de 1
    • Use a Phillips #00 screwdriver to unscrew the six case screws from the back of the phone.

  5. LG VX6100 Keypad Replacement: paso 5, imagen 1 de 2 LG VX6100 Keypad Replacement: paso 5, imagen 2 de 2
    • Insert a plastic opener tool through the seam between the back case and the rest of the phone.

    • Slowly slide the tool along the seam. Lift up on the back case while you do this until the back case comes apart.

  6. LG VX6100 Keypad Replacement, Keypad: paso 6, imagen 1 de 1
    • Lift the bottom of the logic board out of the case.

    • Make sure not to lift the top of the logic board, since it is still connected to the backcase of the phone.

  7. LG VX6100 Keypad Replacement: paso 7, imagen 1 de 1
    • Gently lift up on any edge of the white keypad to remove it from the phone case.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Teal

Miembro Desde 04/17/12

1 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 12-39, Regan Spring 2012 Miembro de Cal Poly, Team 12-39, Regan Spring 2012

CPSU-REGAN-S12S12G39

3 Miembros

16 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 538