Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Orient the phone as shown.
-
Remove the battery cover by pushing upward with your thumb.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Place your fingernail at the top of the battery and pry the battery out towards you.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip the phone open.
-
Remove the four rubber plugs, located at the corners of the LCD screen, with a push-pin.
-
Use a Phillips #00 screwdriver to remove the four screws located underneath the rubber plugs.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert the opening tool in the seam of the top portion of the flip phone.
-
Gently pry the seam open.
-
Move the opening tool around the perimeter of the seam and gently take the front LCD face plate out.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Close the flip phone.
-
Hold the base of the phone and gently remove the faceplate.
-
Place the phone and the faceplate on a clean, flat surface.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.