Introducción

A quick guide to removing the front cover of the flip phone.

Turn the phone on its back.
  • Turn the phone on its back.

Agregar Comentario

Orient the phone as shown.
  • Orient the phone as shown.

  • Remove the battery cover by pushing upward with your thumb.

Agregar Comentario

  • Place your fingernail at the top of the battery and pry the battery out towards you.

Agregar Comentario

  • Flip the phone open.

  • Remove the four rubber plugs, located at the corners of the LCD screen, with a push-pin.

  • Use a Phillips #00 screwdriver to remove the four screws located underneath the rubber plugs.

Agregar Comentario

  • Insert the plastic opening tool in the seam of the top portion of the flip phone.

  • Gently pry the seam open.

  • Move the opening tool around the perimeter of the seam and gently take the front LCD face plate out.

Agregar Comentario

  • Close the flip phone.

  • Hold the base of the phone and gently remove the faceplate.

  • Place the phone and the faceplate on a clean, flat surface.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Douglas Blaalid

Miembro Desde 13/01/10

282 Reputación

15 Guías creadas

Equipo

Cal Poly, Team 4-13, Forte Winter 2010 Miembro de Cal Poly, Team 4-13, Forte Winter 2010

CPSU-FORTE-W10S4G13

5 Miembros

15 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 1,827