Introducción

Replacing the speaker.

Turn the closed phone so that the back panel is facing you.
  • Turn the closed phone so that the back panel is facing you.

  • Press down and forward firmly on the gray tab in the middle of the phone.

Agregar Comentario

Now just lift up on the battery and remove it from the phone.
  • Now just lift up on the battery and remove it from the phone.

Agregar Comentario

  • Remove the rubber grommet using a Spudger.

Agregar Comentario

  • Be sure not to lose the screws. They are small!

  • Remove the five screws using a Phillips #00 Screwdriver.

Agregar Comentario

  • When removing back cover, be careful not to break the speaker wires.

  • Using an iPod Opening Tool, carefully pry off the back cover.

  • Using Tweezers, gently pull speaker wires out.

Agregar Comentario

  • Separate the two halves.

Agregar Comentario

  • Take top half of phone and pry up speaker using the Spudger.

Agregar Comentario

  • Lift out speaker.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

David Foster

Miembro Desde 11/04/10

1 Reputación

8 Guías creadas

Equipo

Cal Poly, Team 25-88, Amido Spring 2010 Miembro de Cal Poly, Team 25-88, Amido Spring 2010

CPSU-AMIDO-S10S25G88

4 Miembros

18 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 1,876