Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Press button labeled "Push". In the photo depicted the button is being depressed by the left finger.
-
Pull back panel toward bottom of phone.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
From the lip on the top of the battery, lift it out of the phone.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the 4 small screws from the back panel, under the battery, using 00 Phillips-head.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Starting at the top of the phone near the antenna, use a screwdriver or other small tool, maybe even fingernails, to pry the rear panel off.
-
By systematically prying up the edges of the back panel, moving about a quarter of an inch, and prying again, the panel will begin to lift off.
-
Don't be afraid to damage anything, the panel requires a bit of force to detach.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
The logic board is only held on with 4 tabs and a data cable in the top right. Simply pry from one side using a screwdriver, popping out the board, before lifting the display data cable.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.