Saltar al contenido principal

Introducción

In this guide we will teach you how to properly remove and replace the flex cable in the LG Tribute HD LS676. The flex cable or cable ribbon is a small delicate cable that is connected to the motherboard. It should be handled cautiously since it can be easily damaged by an applied force.

Partes

No se especificaron partes.

  1. Insert a fingernail, or plastic opening tool, into the cutout on the back cover and pry outward to remove. Insert a fingernail, or plastic opening tool, into the cutout on the back cover and pry outward to remove.
    • Insert a fingernail, or plastic opening tool, into the cutout on the back cover and pry outward to remove.

  2. Pull the battery out of the phone. Remove the SD Card by sliding the card out as shown.
    • Pull the battery out of the phone.

    • Remove the SD Card by sliding the card out as shown.

  3. Remove the twelve 2mm JIS #00 screws from the mid-frame. Remove the twelve 2mm JIS #00 screws from the mid-frame.
    • Remove the twelve 2mm JIS #00 screws from the mid-frame.

  4. Using a plastic opening tool, remove the antenna extender from the bottom. Using a plastic opening tool, remove the antenna extender from the bottom. Using a plastic opening tool, remove the antenna extender from the bottom.
    • Using a plastic opening tool, remove the antenna extender from the bottom.

  5. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  6. Using your fingers, remove the mid-frame. Using your fingers, remove the mid-frame.
    • Using your fingers, remove the mid-frame.

  7. Use a plastic opening tool to disconnect the front and rear cameras from the motherboard. Remove the cameras from the phone. Remove the cameras from the phone.
    • Use a plastic opening tool to disconnect the front and rear cameras from the motherboard.

    • Remove the cameras from the phone.

  8. Using a plastic opening tool, pry up the front facing speaker and remove it from the phone. Using a plastic opening tool, pry up the front facing speaker and remove it from the phone. Using a plastic opening tool, pry up the front facing speaker and remove it from the phone.
    • Using a plastic opening tool, pry up the front facing speaker and remove it from the phone.

  9. Disconnect the LCD from the motherboard with a plastic opening tool.
    • Disconnect the LCD from the motherboard with a plastic opening tool.

  10. Use a plastic opening tool to pry up the motherboard form the display housing. Remove the motherboard from the phone.
    • Use a plastic opening tool to pry up the motherboard form the display housing.

    • Remove the motherboard from the phone.

  11. Use your fingers to remove the flex cables from the phone. Use your fingers to remove the flex cables from the phone.
    • Use your fingers to remove the flex cables from the phone.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Dhruv Patel

Miembro Desde 14/02/18

268 Reputación

2 Guías creadas

Equipo

USF Tampa, Team S1-G3, Nance Spring 2018 Miembro de USF Tampa, Team S1-G3, Nance Spring 2018

USFT-NANCE-S18S1G3

4 Miembros

10 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 3

Últimos 30 Días: 8

Todo El Tiempo: 223