Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Place a fingernail in the notch at the bottom edge of the phone.
-
Pull on the back cover with one hand while keeping the rest of the phone steady, and run your fingernail along the edge.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Place a fingernail in the notch at the bottom edge of the battery.
-
Pull the battery out.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the SIM card in the top right corner on the back of the phone.
-
Remove the SIM card by pushing it with your thumb from left to right.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove all 9 screws on the back by using a Phillips head #J00 screwdriver.
-
To remove the screws rotate them counterclockwise.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert a plastic opening tool in the split at the bottom of the phone (between the bottom shield and the rest of the phone).
-
Pry the bottom shield to separate it from the phone.
-
Once it is loose you should be able to remove it with your hand.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert the flat end of the Spudger between the screen and the chromed frame.
-
Once inserted, run the Spudger along the frame to separate the front part of the phone from the back shield.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.