Repara tus cosas

Derecho a reparar

Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

LG Phoenix 2 Front Camera Replacement

Escrito Por: Sarah Popp (y 2 de otros participantes)
  • Comentarios: 0
  • Favoritos: 0

Dificultad

Moderado

Pasos

6

Tiempo Requerido

30 minutos

Secciones

1

Banderas

0

Introducción

If you need to install a new front camera on your LG Phoenix 2, use this guide to disassemble and replace the damaged front camera. For this guide you will need a plastic opening tool and a Phillips #000 screwdriver head. These steps will be straightforward and easy to follow, but the pieces should be handled with care, so as to not damage or misplace any needed components.

Herramientas

Comprar estas herramientas

Partes

No se especificaron partes.

  1. Insert a fingernail into the notch on the bottom right corner of the phone. Remove the back cover off of the device.

    • Insert a fingernail into the notch on the bottom right corner of the phone.

    • Remove the back cover off of the device.

    Traducir

  2. Insert a fingernail into the notch under the battery.

    • Insert a fingernail into the notch under the battery.

    • Remove the battery.

    Traducir

  4. Insert the opening tool under the bottom cover. Pop off the bottom cover.

    • Insert the opening tool under the bottom cover.

    • Pop off the bottom cover.

    Traducir

  5. Remove eight 3mm screws using the Phillips #0 screwdriver.

    • Remove eight 3mm screws using the Phillips #0 screwdriver.

    Traducir

  6. Insert the opening tool in between the phone screen and the silver trim. Pop off the silver trim.

    • Insert the opening tool in between the phone screen and the silver trim.

    • Pop off the silver trim.

    Traducir

  7. Insert the opening tool under the bottom of the front camera connection to the motherboard. Pop off the front camera.

    • Insert the opening tool under the bottom of the front camera connection to the motherboard.

    • Pop off the front camera.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Sarah Popp

Miembro Desde 26/11/18

395 Reputación

3 Guías creadas

Insignias: 6

+ 3 más insignias

Equipo

IUPUI, Team S7-G7, Wilson Fall 2018 Miembro de IUPUI, Team S7-G7, Wilson Fall 2018

IUPUI-WILSON-F18S7G7

4 Miembros

3 Guías creadas

0 comentarios

Agregar un comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 91