Saltar al contenido principal

LG L1200 Logic Board Replacement

Qué necesitas

  1. LG L1200 Logic Board Replacement, Logic Board: paso 1, imagen 1 de 1
    • Make sure you remove the battery by lifting the tab on the back of the phone before opening the case.

    • Poke out rubber covers using a spudger or pointy object, such as a thumb tack.

  2. LG L1200 Logic Board Replacement: paso 2, imagen 1 de 1
    • Use a T6 torx screwdriver to unscrew the 6 screws that hold the back casing on.

  3. LG L1200 Logic Board Replacement: paso 3, imagen 1 de 1
    • Use IPod opening tool to separate back housing.

    • There are two tabs located on either side of the phone.

  4. LG L1200 Logic Board Replacement: paso 4, imagen 1 de 1
    • Separate the back housing from the phone.

    • Be careful not to rip out the wire (highlighted in yellow) when separating the back housing.

  5. LG L1200 Logic Board Replacement: paso 5, imagen 1 de 1
    • Use a spudger to disconnect antenna wire.

  6. LG L1200 Logic Board Replacement: paso 6, imagen 1 de 1
    • Use the IPod opening tool to pop out the logic board.

  7. LG L1200 Logic Board Replacement: paso 7, imagen 1 de 1
    • Use the IPod opening tool to disconnect the main ribbon.

  8. LG L1200 Logic Board Replacement: paso 8, imagen 1 de 1
    • Once the ribbon is detached, remove the logic board and replace if necessary.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Joshua Herrmann

Miembro Desde 04/16/10

8 Reputación

8 Guías creadas

Equipo

Cal Poly, Team 6-14, Maness Spring 2010 Miembro de Cal Poly, Team 6-14, Maness Spring 2010

CPSU-MANESS-S10S6G14

4 Miembros

16 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 1,209