Repara tus cosas Comunidad Tienda

LG K7 Headphone Jack Replacement

Introducción

A malfunctioning headphone jack is often the problem if you are experiencing a lack of audio through headphones. Replacement headphone jacks can be found online.

Qué necesitas

  1. LG K7 Headphone Jack Replacement, Battery: paso 1, imagen 1 de 2 LG K7 Headphone Jack Replacement, Battery: paso 1, imagen 2 de 2

    • Place a fingernail in slot at in the bottom edge of the phone.

    • Pull up on the back panel while holding down the rest of the phone steady with your hand.

    • Do not to pull too hard on the back panel or you may break it.

    Traducir

  2. LG K7 Headphone Jack Replacement: paso 2, imagen 1 de 2 LG K7 Headphone Jack Replacement: paso 2, imagen 2 de 2

    • Place a fingernail in the slot at the bottom edge of the battery.

    • Pull the battery out.

    Traducir

  4. LG K7 Headphone Jack Replacement, Headphone Jack: paso 3, imagen 1 de 3 LG K7 Headphone Jack Replacement, Headphone Jack: paso 3, imagen 2 de 3 LG K7 Headphone Jack Replacement, Headphone Jack: paso 3, imagen 3 de 3

    • Remove the nine frame screws with a #J00 screwdriver.

    • The bottom three screws release the port cover at the bottom of the phone. The cover should lift off easily once the screws are out.

    • Pop the camera button frame off with a spudger. The home button should come off along with the frame.

    • Be gentle with the frame when removing it. The plastic is very thin and can easily break.

    Traducir

  5. LG K7 Headphone Jack Replacement: paso 4, imagen 1 de 2 LG K7 Headphone Jack Replacement: paso 4, imagen 2 de 2

    • Use a plastic opening tool to separate the screen from the outer frame.

    • The frame is held to the rest of the phone with plastic tabs. Release each tab one at a time around the phone for the easiest removal.

    • Do not bend the outer frame or screen when separating them. This will severely damage the phone.

    Traducir

  6. LG K7 Headphone Jack Replacement: paso 5, imagen 1 de 1

    • Line up a plastic opening tool underneath the headphone jack and hold the main body of the phone down.

    • Lift or the plastic opening tool to separate the headphone jack from the main body of the phone.

    • Be careful to not damage the components that the headphone jack sits in.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 1 otro colaborador

James Ngo

Miembro Desde 01/19/18

461 Reputación

4 Guías creadas

Insignias: 7

+ 4 más insignias

Equipo

Cal Poly, Team S21-G5, Banghart Winter 2018 Miembro de Cal Poly, Team S21-G5, Banghart Winter 2018

CPSU-BANGHART-W18S21G5

4 Miembros

8 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 942