Saltar al contenido principal

LG Incite Back Panel Replacement

Qué necesitas

  1. LG Incite Back Panel Replacement, Battery: paso 1, imagen 1 de 1
    • Hold the phone camera-side up and locate the rear cover.

  2. LG Incite Back Panel Replacement: paso 2, imagen 1 de 1
    • Place a thumb below the camera, apply a little pressure, and slide the cover toward the bottom of the phone.

  3. LG Incite Back Panel Replacement: paso 3, imagen 1 de 1
    • Place the plastic opening tool in the small slot below and to the left of the battery.

    • Pry the battery upward to remove it.

  4. LG Incite Back Panel Replacement, Back Panel: paso 4, imagen 1 de 1
    • Using the #00 Philips screw driver, unscrew the four 4.5mm screws located around the battery compartment.

  5. LG Incite Back Panel Replacement: paso 5, imagen 1 de 1
    • Wedge the plastic opening tool between the screen and the body of the device, using care to avoid damaging internal components.

    • Gently move the tool around the perimeter of the screen to separate it from the body.

    • You should not completely separate the screen from the device in this step.

  6. LG Incite Back Panel Replacement: paso 6, imagen 1 de 1
    • Flip the device over so the battery compartment faces up.

    • Press the scroll wheel, located in the upper-left corner, into the device to avoid damage.

    • Gently insert the plastic opening tool into the seam between the frame and front cover to separate the back panel from the device.

    • The volume, lock, and camera buttons are loose, so be careful not to misplace them.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Kimberly Kha

Miembro Desde 04/16/13

163 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 2-18, Maness Spring 2013 Miembro de Cal Poly, Team 2-18, Maness Spring 2013

CPSU-MANESS-S13S2G18

4 Miembros

11 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 9

Ultimos 30 días: 12

Todo El Tiempo: 711