Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
While holding the battery release button, pull the bottom end of the phone out of the body.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert the sim card eject tool (0.8mm sim card eject head) into the small hole on the sim card tray.
-
Press inward with some force to eject the tray.
-
Pull the sim card tray out of the phone.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two 5.5mm Phillips #00 screws from the base of the phone.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert the plastic opening tool into the seam between the glass screen and the metal body.
-
Pry the glass from the body only a slight amount.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert the Spudger into the now open space between the body and screen.
-
Push inward to separate the screen even more.
-
Slowly slide the nylon spudger up the edge the phone till the screen pops out of the body.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Peel the screen away from the body. The two parts should be completely separated.
-
Cancelar: No complete esta guía.
32 personas más completaron esta guía.
4 comentarios
quickest 50 bucks i ever made, lol. Thanks for having the guide up.
Love this phone... So MODULAR! Thanks for the guide.. Had to double-check when I was pulling it apart.. almost seemed too easy.