Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
While holding the battery release button, pull the bottom end of the phone out of the body.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert the sim card eject tool (0.8mm sim card eject head) into the small hole on the sim card tray.
-
Press inward with some force to eject the tray.
-
Pull the sim card tray out of the phone.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two 5.5mm Phillips #00 screws from the base of the phone.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert the plastic opening tool into the seam between the glass screen and the metal body.
-
Pry the glass from the body only a slight amount.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert the Spudger into the now open space between the body and screen.
-
Push inward to separate the screen even more.
-
Slowly slide the nylon spudger up the edge the phone till the screen pops out of the body.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Peel the screen away from the body. The two parts should be completely separated.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Once the screen has been separated from the back of the phone, now you can remove the motherboard.
-
Using the #00 Philips head, remove the six 2.7mm Phillips screws.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert the plastic opening tool between the screen-ribbon-connector and the motherboard, then pull up. It should pop out easily.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Separate the motherboard of the phone from the screen of the phone
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Make sure to transfer the earpiece from the old screen to the new screen or else you wouldn't be able to hear anyone when you make phone calls!
-
The component is fragile so don't try to force it to come out with a pair of tweezers. A pick should be able to wedge it out.
-
Be careful with the adhesive that's connected to it. It's easy to pull out.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Also remove the earpiece casing from the old screen by popping it out with a pair of tweezers.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using the plastic opening tool, remove the ribbon attaching the sensor to the motherboard.
-
Cancelar: No complete esta guía.
6 personas más completaron esta guía.
Un comentario
Is that the camera sensor that has been removed or the wide angle camera?