Saltar al contenido principal

Introducción

Use this guide to remove or replace the back cover of the LG G3 (B855).

  1. Power off your phone before beginning disassembly. Insert a thumbnail, or a prying tool like a spudger, into the notch at the bottom left of the back cover.
    • Power off your phone before beginning disassembly.

    • Insert a thumbnail, or a prying tool like a spudger, into the notch at the bottom left of the back cover.

    • Pry the back cover up to separate its plastic clips.

  2. Lift the back cover to release the rest of the plastic clips and remove it. In case you can't lift the back cover completely, slide your fingernail or your prying tool around the midframe to release the remaining clips.
    • Lift the back cover to release the rest of the plastic clips and remove it.

    • In case you can't lift the back cover completely, slide your fingernail or your prying tool around the midframe to release the remaining clips.

    • To reinstall the back cover, press it firmly into place until you hear a snap from the plastic clips to form a seamless connection with the rear side of the phone.

Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Dominik Schnabelrauch

Miembro Desde 23/11/16

90,745 Reputación

375 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

136 Miembros

16,066 Guías creadas

Really. Was this necessary

James Beam - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 4,023