Saltar al contenido principal

LG G Pad 7.0 LTE Motherboard Replacement

Qué necesitas

  1. LG G Pad 7.0 LTE Motherboard Replacement, Removing the Back Cover: paso 1, imagen 1 de 1
    • Power off your device before beginning the battery replacement (hold the button with the red marker until the device prompts you to power it off, then tap "Power Off").

    • Be wary of the front screen and SIM Card while tearing down the device.

  2. LG G Pad 7.0 LTE Motherboard Replacement: paso 2, imagen 1 de 1
    Herramienta utilizada en este paso:
    Anti-Static Wrist Strap
    $7.95
    Comprar
    • Put on an Anti-Static Wrist Strap to prevent damage to sensitive electrical components (optional).

    • To separate the frame from the cover, pry between the screen and the cover using a plastic prying tool.

    • Begin at the top left of the device to avoid damaging the motherboard and work your way around the perimeter of the screen.

    • When you pry your device open, be wary of the volume rockers, motherboard, and camera. These components are delicate and can be sensitive to static electricity.

  3. LG G Pad 7.0 LTE Motherboard Replacement, Motherboard: paso 3, imagen 1 de 1
    • Disconnect the battery connector by prying it upwards (red marker).

    • Be careful not to damage it while doing so.

    • Remove the ribbon cables by prying them upwards with a plastic pry tool ).

    • Do not bend the cable or connector as they are fragile.

  4. LG G Pad 7.0 LTE Motherboard Replacement: paso 4, imagen 1 de 1
    • There is a light adhesive holding the camera in the device.

    • Using tweezers or a small plastic pry tool gently pull or pry the camera out of the device.

  5. LG G Pad 7.0 LTE Motherboard Replacement: paso 5, imagen 1 de 1
    • Pry the audio jack from the device using a spudger.

  6. LG G Pad 7.0 LTE Motherboard Replacement: paso 6, imagen 1 de 1
    • Remove the 7 Black 3mm PH0 screws from the motherboard (red markers).

  7. LG G Pad 7.0 LTE Motherboard Replacement: paso 7, imagen 1 de 1
    • Remove the Motherboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Fadi Bitar

Miembro Desde 09/26/16

880 Reputación

6 Guías creadas

Equipo

USF Tampa, Team 14-6, Eyestone Fall 2016 Miembro de USF Tampa, Team 14-6, Eyestone Fall 2016

USFT-EYESTONE-F16S14G6

4 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 536