Repara tus cosas Comunidad Tienda

LG Flare Microphone Replacement

Introducción

This guide will show you how to take your LG Flare apart to reach the microphone and replace it.

If you find yourself having cell phone issues such as someone not being able to hear you during a phone call or audio recordings are not picking up any noise, you may have a broken microphone.

Qué necesitas

  1. LG Flare Microphone Replacement, Microphone: paso 1, imagen 1 de 2 LG Flare Microphone Replacement, Microphone: paso 1, imagen 2 de 2

    • Remove the back cover by pressing on the top middle raised lines of the back cover and sliding the cover off.

    Editar

  2. LG Flare Microphone Replacement: paso 2, imagen 1 de 1

    • Remove the battery by popping the top out and removing the battery.

    Editar

  3. LG Flare Microphone Replacement: paso 3, imagen 1 de 1

    • Use appropriately sized Philips-head screwdriver to remove the six small screws on the back of the phone under the battery.

    Editar

  4. LG Flare Microphone Replacement: paso 4, imagen 1 de 1

    • Use an opening tool to pop the back panel apart around the edges, and then pry the whole piece off.

    Editar

  6. LG Flare Microphone Replacement: paso 5, imagen 1 de 1

    • Use an opening tool to separate the tabs on the green circuit board from the front body of the phone.

    Editar

  7. LG Flare Microphone Replacement: paso 6, imagen 1 de 1

    • Use an opening tool to pop the orange connecting strip off of the circuit board.

    Editar

  8. LG Flare Microphone Replacement: paso 7, imagen 1 de 1

    • Un-clip the 2 metal clips on one side of the circuit board.

    Editar

  9. LG Flare Microphone Replacement: paso 8, imagen 1 de 2 LG Flare Microphone Replacement: paso 8, imagen 2 de 2
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar

    • Using tweezers and wedge, remove silver piece from green circuit board.

    Editar

  10. LG Flare Microphone Replacement: paso 9, imagen 1 de 1

    • Remove the microphone (rip soldering).

    Editar

  11. LG Flare Microphone Replacement: paso 10, imagen 1 de 1

    • Solder new microphone in place OR buy replacement circuit board from www.ifixit.com and replace.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 7 otros colaboradores

Kelsey Hanna

Miembro Desde 09/29/15

1 Reputación

1 Guía escrita

Insignias: 3

Equipo

Ohio State, Team 1-3, Garvin Fall 2015 Miembro de Ohio State, Team 1-3, Garvin Fall 2015

OSU-GARVIN-F15S1G3

4 Miembros

4 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 5

Ultimos 30 días: 11

Todo El Tiempo: 185