Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn the phone off.
-
Flip it over so the front screen is facing down.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Slide the release latch down and toward you while lifting up on the left side of the battery cover.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the three screw covers on the back of the phone. Using your fingernail (or a spudger, pry off screw covers.
-
Using a Phillips #000 Screwdriver, remove the 1.5mm #000 Phillips screws that were under the screw covers.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the two inner 1.5mm #000 Phillips screws and remove them using a Phillips #000 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a plastic opening tool or your fingernail to pry off the back case.
-