Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

LG EnV Touch VX11000 Screen Assembly Replacement

Qué necesitas

  1. LG EnV Touch VX11000 Screen Assembly Replacement, Battery: paso 1, imagen 1 de 1
    • Turn the phone off.

    • Flip it over so the front screen is facing down.

  2. LG EnV Touch VX11000 Screen Assembly Replacement: paso 2, imagen 1 de 1
    • Slide the release latch down and toward you while lifting up on the left side of the battery cover.

  3. LG EnV Touch VX11000 Screen Assembly Replacement: paso 3, imagen 1 de 2 LG EnV Touch VX11000 Screen Assembly Replacement: paso 3, imagen 2 de 2
    • Lift the edge of the battery to remove it.

  4. LG EnV Touch VX11000 Screen Assembly Replacement, Volume and Camera Buttons: paso 4, imagen 1 de 2 LG EnV Touch VX11000 Screen Assembly Replacement, Volume and Camera Buttons: paso 4, imagen 2 de 2
    • Locate the three screw covers on the back of the phone. Using your fingernail (or a spudger, pry off screw covers.

    • Using a Phillips #000 Screwdriver, remove the 1.5mm #000 Phillips screws that were under the screw covers.

  5. LG EnV Touch VX11000 Screen Assembly Replacement: paso 5, imagen 1 de 1
    • Locate the two inner 1.5mm #000 Phillips screws and remove them using a Phillips #000 screwdriver.

  6. LG EnV Touch VX11000 Screen Assembly Replacement: paso 6, imagen 1 de 2 LG EnV Touch VX11000 Screen Assembly Replacement: paso 6, imagen 2 de 2
    • Use a plastic opening tool or your fingernail to pry off the back case.

    • The camera and volume keys will fall off.

  7. LG EnV Touch VX11000 Screen Assembly Replacement, Screen Assembly: paso 7, imagen 1 de 3 LG EnV Touch VX11000 Screen Assembly Replacement, Screen Assembly: paso 7, imagen 2 de 3 LG EnV Touch VX11000 Screen Assembly Replacement, Screen Assembly: paso 7, imagen 3 de 3
    • Open the phone at a 90 degree angle. This needs to be done in order to reach the screws.

    • Locate the two 1.5mm #000 Phillips screws on the outside of each hinge.

    • Remove the two 1.5mm #000 Phillips screws with a Phillips #000 screwdriver.

  8. LG EnV Touch VX11000 Screen Assembly Replacement: paso 8, imagen 1 de 2 LG EnV Touch VX11000 Screen Assembly Replacement: paso 8, imagen 2 de 2
    • Pry off the two screw covers on the inside screen, using a spudger or your fingernail.

    • Remove the two 1.5mm #000 Phillips screws that were under the screw covers using the Phillips #000 screwdriver.

  9. LG EnV Touch VX11000 Screen Assembly Replacement: paso 9, imagen 1 de 2 LG EnV Touch VX11000 Screen Assembly Replacement: paso 9, imagen 2 de 2
    • Pry off the front frame using your fingernail.

    • The frame should still be connected to the rest of the phone by the orange tab.

  10. LG EnV Touch VX11000 Screen Assembly Replacement: paso 10, imagen 1 de 1
    • Remove the four 1.5mm #000 Phillips screws at each of the corners of the phone, using the Phillips #000 screwdriver.

  11. LG EnV Touch VX11000 Screen Assembly Replacement: paso 11, imagen 1 de 3 LG EnV Touch VX11000 Screen Assembly Replacement: paso 11, imagen 2 de 3 LG EnV Touch VX11000 Screen Assembly Replacement: paso 11, imagen 3 de 3
    • Peel off the gold tape.

    • Gently pry up the metal frame with your fingers so that the screen can be removed.

  12. LG EnV Touch VX11000 Screen Assembly Replacement: paso 12, imagen 1 de 2 LG EnV Touch VX11000 Screen Assembly Replacement: paso 12, imagen 2 de 2
    • Unplug the connector from the screen.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Rachel Smith

Miembro Desde 09/30/13

593 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 13-2, Forte Fall 2013 Miembro de Cal Poly, Team 13-2, Forte Fall 2013

CPSU-FORTE-F13S13G2

4 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 6

Todo El Tiempo: 1,084