Introducción
How to replace the command button if broken or not working properly.
Qué necesitas
-
-
Insert the spudger into the notch on the bottom left side of the phone.
-
Apply light pressure to remove the back cover.
-
-
-
-
Use the PH000 bit unscrew the ten 3.4mm screws as highlighted.
-
Use the spudger to remove the inner shell.
-
Flip the inner shell over to expose the clips holding the command button.
-
Casi Terminas!
To reassemble your device, follow these instructions in reverse order.
Conclusión
To reassemble your device, follow these instructions in reverse order.