Introducción

The TV turns off by itself after a while or the TV will not start, blown off capacitors could be the source off error.

MAKE SURE THAT YOUR DEVICE IS UNPLUGED!
  • MAKE SURE THAT YOUR DEVICE IS UNPLUGED!

  • Open the case carefully while loosing the marked srews.

Agregar Comentario

Check the power-board. If there are any blown-up capacitors, you should replace them.
  • Check the power-board. If there are any blown-up capacitors, you should replace them.

  • For removing the capacitors, remove the board, take a soldering bolt and heat the solder points at the back of the board.

  • Insert the replacement capacitors and solder it. Check the poles!

Agregar Comentario

Note: If you are not sure about the condition of the capacitors you can prove it with a good measuring device after the expansion.
  • Note: If you are not sure about the condition of the capacitors you can prove it with a good measuring device after the expansion.

Agregar Comentario

Conclusión

Not all capacitors are need in any case. To reassemble your device, follow these instructions in reverse order.

9 personas más completaron esta guía.

eugl18

Miembro Desde 18/01/13

561 Reputación

1 Guía escrita

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 4

Últimos 7 Días: 19

Últimos 30 Días: 88

Todo El Tiempo: 8,937