Saltar al contenido principal

Kyvol Cybovac L20 Motherboard Replacement

Qué necesitas

  1. Kyvol Cybovac L20 Motherboard Replacement, Battery: paso 1, imagen 1 de 1
    • Begin with the device laying on a flat surface with the power button facing up.

  2. Kyvol Cybovac L20 Motherboard Replacement: paso 2, imagen 1 de 2 Kyvol Cybovac L20 Motherboard Replacement: paso 2, imagen 2 de 2
    • Remove both of the side brushes.

  3. Kyvol Cybovac L20 Motherboard Replacement: paso 3, imagen 1 de 1
    • Use a Phillips #1 screwdriver to remove two 1 mm screws that secure the panel.

    • Remove the battery panel.

  4. Kyvol Cybovac L20 Motherboard Replacement: paso 4, imagen 1 de 2 Kyvol Cybovac L20 Motherboard Replacement: paso 4, imagen 2 de 2
    • Slightly lift the battery out of the compartment.

    • Disconnect the battery connector.

    • Completely remove the battery.

  5. Kyvol Cybovac L20 Motherboard Replacement, Motherboard: paso 5, imagen 1 de 1
    • Use a Phillips #1 screwdriver to remove 8 screws from the device as shown.

  6. Kyvol Cybovac L20 Motherboard Replacement: paso 6, imagen 1 de 2 Kyvol Cybovac L20 Motherboard Replacement: paso 6, imagen 2 de 2
    • Lift base up and unplug any cable connected form the motherboard into the rest of the components.

  7. Kyvol Cybovac L20 Motherboard Replacement: paso 7, imagen 1 de 1
    • Use a Phillips #1 screwdriver to remove the 4 screws holding the motherboard in place.

    • Lift the motherboard up and out of the chassis.

Conclusión

To reassemble your device, follow these instructions in reverse order.

ErickAmaya

Miembro Desde 09/12/23

97 Reputación

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 7

Todo El Tiempo: 45