Saltar al contenido principal

Kyocera Oystr Screen Replacement

Qué necesitas

  1. Kyocera Oystr Screen Replacement, Removing the battery: paso 1, imagen 1 de 3 Kyocera Oystr Screen Replacement, Removing the battery: paso 1, imagen 2 de 3 Kyocera Oystr Screen Replacement, Removing the battery: paso 1, imagen 3 de 3
    • Make sure the phone is turned off before disassembly.

    • Lift the bottom of the phone's back cover upwards, revealing the phone's battery housing.

    • Remove the battery from the casing. This is simply a precaution.

    • Turn the phone over, so that the front side is facing you. Open the device in preparation for the next step.

  2. Kyocera Oystr Screen Replacement, Removing screws from screen: paso 2, imagen 1 de 3 Kyocera Oystr Screen Replacement, Removing screws from screen: paso 2, imagen 2 de 3 Kyocera Oystr Screen Replacement, Removing screws from screen: paso 2, imagen 3 de 3
    • Peel the Virgin Mobile sticker off of the phone's screen to reveal two screws beneath it.

    • Use the Tri-Wing Y0 screwdriver to remove the two screws from the screen.

  3. Kyocera Oystr Screen Replacement, Exposing internal components: paso 3, imagen 1 de 3 Kyocera Oystr Screen Replacement, Exposing internal components: paso 3, imagen 2 de 3 Kyocera Oystr Screen Replacement, Exposing internal components: paso 3, imagen 3 de 3
    • Lift the plastic cover of the phone screen upwards with a plastic opening tool.

    • Remove the two screws from the metal cover.

  4. Kyocera Oystr Screen Replacement, Removing metal cover: paso 4, imagen 1 de 1
    • Remove the metal cover by lifting up and away from the device.

  5. Kyocera Oystr Screen Replacement, Screen removal: paso 5, imagen 1 de 3 Kyocera Oystr Screen Replacement, Screen removal: paso 5, imagen 2 de 3 Kyocera Oystr Screen Replacement, Screen removal: paso 5, imagen 3 de 3
    • Use the plastic opening tool to pry the phone's speakers up and away from the device. These speakers will dangle by the wires attached to the board.

    • Use your fingernail to detach the ribbon connecting the board to the screen.

    • Remove the damaged screen from the device.

  6. Kyocera Oystr Screen Replacement, Completing the repair: paso 6, imagen 1 de 1
    • Follow these steps in reverse order to replace Kyocera Oystr’s screen.

Conclusión

To reassemble your device, follow these instructions in reverse order.

David

Miembro Desde 10/04/11

24 Reputación

2 Guías creadas

Equipo

UW Stout, Team 5-7, Zhou Fall 2011 Miembro de UW Stout, Team 5-7, Zhou Fall 2011

UWSTOUT-ZHOU-F11S5G7

2 Miembros

4 Guías creadas

2 comentarios

My screen goes blank for days, then shows. maybe for minutes of seconds. Do I need to replace the screen, or is there a control I can try to bring back the display? The phone is charged and rings. Yours is a wonderful website. Thank you.

Martha Carnahan mpc@netsync.net

Martha Carnahan - Contestar

My screen goes blank for days, then appears, but only for minutes or seconds before it goes blank again. Do I need to replace the screen, or do you know if there a command which would solve the problem? The phone is charged and rings.

Martha Carnahan - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 2,196