Repara tus cosas Comunidad Tienda

Kurio Touch 4S Screen Replacement

Introducción

This guide will show you how to replace your broken screen.

Qué necesitas

  1. Kurio Touch 4S Screen Replacement, Screen: paso 1, imagen 1 de 1

    • Make sure to open the back cover easily using the plastic opening tool

    Editar

  2. Kurio Touch 4S Screen Replacement: paso 2, imagen 1 de 3 Kurio Touch 4S Screen Replacement: paso 2, imagen 2 de 3 Kurio Touch 4S Screen Replacement: paso 2, imagen 3 de 3

    • Remove back cover by prying away from the Kurio.

    • The easiest place to remove the cover is from the bottom and top; try to open it from right to left sides.

    Editar

  3. Kurio Touch 4S Screen Replacement: paso 3, imagen 1 de 2 Kurio Touch 4S Screen Replacement: paso 3, imagen 2 de 2

    • To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the Philips#1 Screwdriver.

    Editar

  4. Kurio Touch 4S Screen Replacement: paso 4, imagen 1 de 1

    • After you remove your four 5mm Phillips screws, use your plastic opening tool to help you open the plastic cover of your device.

    • All these screws are identical so don't worry if you get them out of order.

    Editar

  5. Kurio Touch 4S Screen Replacement: paso 5, imagen 1 de 1

    • Remove the plastic cover that is covering the camera area.

    Editar

  7. Kurio Touch 4S Screen Replacement: paso 6, imagen 1 de 1

    • Separate the two halves of your Kurio Touch 4S and lay them besides each other.

    Editar

  8. Kurio Touch 4S Screen Replacement: paso 7, imagen 1 de 1

    • Use Phillips # 1 screw to open the 4 screws on the motherboard.

    • Open the screws gently and do not apply too much force as you could damage the motherboard.

    Editar

  9. Kurio Touch 4S Screen Replacement: paso 8, imagen 1 de 1

    • Use the plastic opener to remove the battery.

    Editar

  10. Kurio Touch 4S Screen Replacement: paso 9, imagen 1 de 1
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar

    • Use tweezers to remove the black tape that is attached to the motherboard.

    Editar

  11. Kurio Touch 4S Screen Replacement: paso 10, imagen 1 de 2 Kurio Touch 4S Screen Replacement: paso 10, imagen 2 de 2

    • Detach all the wire that are connected to the motherboard.

    • Also remove the camera module and other components that are attached to the motherboard.

    • For more information on soldering Click here

    Editar

  12. Kurio Touch 4S Screen Replacement: paso 11, imagen 1 de 1

    • Remove the motherboard with the help of plastic opener.

    • Detach the power plug before you remove the motherboard.

    Editar

  13. Kurio Touch 4S Screen Replacement: paso 12, imagen 1 de 1

    • Use the Plastic opener to remove the screen.

    • Do not apply too much pressure as the front cover could be damaged.

    Editar

  14. Kurio Touch 4S Screen Replacement: paso 13, imagen 1 de 1

    • Use the soldering tool to remove the wire that is attached to the screen & the motherboard.

    Editar

  15. Kurio Touch 4S Screen Replacement: paso 14, imagen 1 de 1

    • Use tweezers to remove the screen from your Kurio Toich 4S.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Autor

con 4 otros colaboradores

Ali

Miembro Desde 01/21/15

184 Reputación

1 Guía escrita

Insignias: 8

+ 5 más insignias

Equipo

USF Tampa, Team 6-5, Brown Winter 2015 Miembro de USF Tampa, Team 6-5, Brown Winter 2015

USFT-BROWN-W15S6G5

3 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 3

Ultimos 30 días: 13

Todo El Tiempo: 1,382