Koosh Vortex Tornado Barrel Shield Spring Replacement

Introducción

This guide will show you how to replace the barrel shield spring on the Koosh Vortex Tornado.

Pull the halves of the toy gun apart to show the inside. Set the left half aside (all of the inside components are on the right half).

Using a spudger, unhook the barrel shield's spring from the right half of the toy gun. One side should still be connected to the shield barrel shield.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Miembro Desde 02/16/16

155 Reputación

1 Guía escrita

IUPUI-HARLEY-S16S2G4

4 Miembros

3 Guías creadas