Introducción

Use this guide to replace the front cover.

Partes

No se requieren partes.

  1. Have the camera facing up and the flash closest to you.
    • Have the camera facing up and the flash closest to you.

    • Unscrew the two 6.2 mm Phillips screws on the top half of the camera.

  2. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  3. Flip camera to other side-with flash farthest from you.
    • Flip camera to other side-with flash farthest from you.

    • Unscrew top two 6.2mm Phillips screws on this side.

  4. Turn the camera so the bottom is facing up with the front facing away.
    • Turn the camera so the bottom is facing up with the front facing away.

    • Unscrew the 6.2mm Phillips screw on the top right.

    • The front cover is now unscrewed and should be lifted up evenly and removed.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Michelle

Miembro Desde 04/04/11

86 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 25-28, Garner Spring 2011 Miembro de Cal Poly, Team 25-28, Garner Spring 2011

CPSU-GARNER-S11S25G28

4 Miembros

6 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 2

Todo El Tiempo: 1,691