Saltar al contenido principal

Kodak S100 EF Film Replacement

Qué necesitas

  1. Kodak S100 EF Film Replacement, Film: paso 1, imagen 1 de 1
    • Lift up the lever from the center of the film roller.

    • Turn it clockwise to roll up the film until you feel the roller release, indicating all the film has been rolled up.

  2. Kodak S100 EF Film Replacement: paso 2, imagen 1 de 1
    • On the far left side on the back of the camera there is a switch that says "open."

    • Slide the button up to the top where it says "open."

    • This should pop open the door, revealing the rolled up film inside.

  3. Kodak S100 EF Film Replacement: paso 3, imagen 1 de 1
    • To take out the old film and insert the new, you must lift up on the film roller.

    • Pull up on the lever to pop the roller up which will release the film.

    • Remove the old roll of film and slide in the new roll.

    • Push the roller back down to secure the film.

  4. Kodak S100 EF Film Replacement: paso 4, imagen 1 de 1
    • To prepare the film for use, slightly pull the tail of the film out of the roll.

    • Drag the tail end of the film past the rotating column on the right side.

    • Attach the hooks at the base of the column to the holes located at the bottom of the film.

  5. Kodak S100 EF Film Replacement: paso 5, imagen 1 de 1
    • After the film is secured, close the camera door.

    • Make sure the lever is put back in place on the film roller.

    • Use the scroll wheel to advance the film until it is ready to take pictures.


Once the film is in place-to reassemble the camera-close the camera door and make sure the scroll wheel is pushed back down.

Una persona más ha completado esta guía.


Miembro Desde 04/04/11

107 Reputación

5 Guías creadas


Cal Poly, Team 25-28, Garner Spring 2011 Miembro de Cal Poly, Team 25-28, Garner Spring 2011


4 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 10

Ultimos 30 días: 44

Todo El Tiempo: 9,170