Saltar al contenido principal

Kodak Easyshare V1003 Lens Replacement

Qué necesitas

  1. Kodak Easyshare V1003 Lens  Replacement, Battery: paso 1, imagen 1 de 1
    • Turn off camera by firmly pressing the power button that is located on the top of the camera.

  2. Kodak Easyshare V1003 Lens  Replacement: paso 2, imagen 1 de 1
    • Position camera with the bottom facing up.

  3. Kodak Easyshare V1003 Lens  Replacement: paso 3, imagen 1 de 1
    • With your finger, slide the battery cover in the direction of the open arrow.

  4. Kodak Easyshare V1003 Lens  Replacement: paso 4, imagen 1 de 1
    • Lift the battery cover up gently.

  5. Kodak Easyshare V1003 Lens  Replacement: paso 5, imagen 1 de 2 Kodak Easyshare V1003 Lens  Replacement: paso 5, imagen 2 de 2
    • Gently push the battery down until a click is heard. Battery should release and be lifted out of slot.

  6. Kodak Easyshare V1003 Lens  Replacement, Lens: paso 6, imagen 1 de 2 Kodak Easyshare V1003 Lens  Replacement, Lens: paso 6, imagen 2 de 2
    • Use a J00 screwdriver to remove the five exterior screws.

  7. Kodak Easyshare V1003 Lens  Replacement: paso 7, imagen 1 de 1
    • Pull the outer case off using the plastic opening tool.

  8. Kodak Easyshare V1003 Lens  Replacement: paso 8, imagen 1 de 2 Kodak Easyshare V1003 Lens  Replacement: paso 8, imagen 2 de 2
    • Remove the LCD display by unplugging the connector

    • Take apart the LCD display from the back case

  9. Kodak Easyshare V1003 Lens  Replacement: paso 9, imagen 1 de 2 Kodak Easyshare V1003 Lens  Replacement: paso 9, imagen 2 de 2
    • Peel off the yellow film.

    • Peel off the black tape holding the wires.

  10. Kodak Easyshare V1003 Lens  Replacement: paso 10, imagen 1 de 1
    • Unplug the connector by lifting the little lock holding it in place.

  11. Kodak Easyshare V1003 Lens  Replacement: paso 11, imagen 1 de 2 Kodak Easyshare V1003 Lens  Replacement: paso 11, imagen 2 de 2
    • Use a J00 screwdriver to remove two screws located on the far right, near to the main button.

  12. Kodak Easyshare V1003 Lens  Replacement: paso 12, imagen 1 de 3 Kodak Easyshare V1003 Lens  Replacement: paso 12, imagen 2 de 3 Kodak Easyshare V1003 Lens  Replacement: paso 12, imagen 3 de 3
    • Use a J00 screwdriver to remove 6 screws located at the center of the back panel.

    • Gently pull out the lens using you finger tips or pincers.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Sarah Berry

Miembro Desde 03/21/17

301 Reputación

3 Guías creadas

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 7

Todo El Tiempo: 307