Repara tus cosas Comunidad Tienda

Kodak Easyshare V1003 LCD Display Replacement

Introducción

This guide provides step-by-step instructions for removing and replacing the LCD display. There are two tools required and no safety precautions needed.

Qué necesitas

  1. Kodak Easyshare V1003 LCD Display Replacement, Battery: paso 1, imagen 1 de 1

    • Turn off camera by firmly pressing the power button that is located on the top of the camera.

    Editar

  2. Kodak Easyshare V1003 LCD Display Replacement: paso 2, imagen 1 de 1

    • Position camera with the bottom facing up.

    Editar

  3. Kodak Easyshare V1003 LCD Display Replacement: paso 3, imagen 1 de 1

    • With your finger, slide the battery cover in the direction of the open arrow.

    Editar

  4. Kodak Easyshare V1003 LCD Display Replacement: paso 4, imagen 1 de 1

    • Lift the battery cover up gently.

    Editar

  6. Kodak Easyshare V1003 LCD Display Replacement: paso 5, imagen 1 de 2 Kodak Easyshare V1003 LCD Display Replacement: paso 5, imagen 2 de 2

    • Gently push the battery down until a click is heard. Battery should release and be lifted out of slot.

    Editar

  7. Kodak Easyshare V1003 LCD Display Replacement, Buttons: paso 6, imagen 1 de 3 Kodak Easyshare V1003 LCD Display Replacement, Buttons: paso 6, imagen 2 de 3 Kodak Easyshare V1003 LCD Display Replacement, Buttons: paso 6, imagen 3 de 3

    • Use a J00 screwdriver to remove the five exterior screws.

    Editar

  8. Kodak Easyshare V1003 LCD Display Replacement: paso 7, imagen 1 de 3 Kodak Easyshare V1003 LCD Display Replacement: paso 7, imagen 2 de 3 Kodak Easyshare V1003 LCD Display Replacement: paso 7, imagen 3 de 3

    • Use a plastic opening tool to pry off the back casing.

    Editar

  9. Kodak Easyshare V1003 LCD Display Replacement: paso 8, imagen 1 de 3 Kodak Easyshare V1003 LCD Display Replacement: paso 8, imagen 2 de 3 Kodak Easyshare V1003 LCD Display Replacement: paso 8, imagen 3 de 3

    • Completely remove the back casing from the device.

    • Using a plastic tool to remove the bottom.

    Editar

  10. Kodak Easyshare V1003 LCD Display Replacement, LCD Display: paso 9, imagen 1 de 1

    • Remove the LCD display by unplugging the connector.

    Editar

  11. Kodak Easyshare V1003 LCD Display Replacement: paso 10, imagen 1 de 1

    • Take apart the LCD display from the back case.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 3 otros colaboradores

Vanessa Soares

Miembro Desde 03/15/17

222 Reputación

2 Guías creadas

Insignias: 7

+ 4 más insignias

Equipo

UMass Dartmouth, Team S9-G4, Martin Spring 2017 Miembro de UMass Dartmouth, Team S9-G4, Martin Spring 2017

UMASSD-MARTIN-S17S9G4

4 Miembros

10 Guías creadas

Un comentario

Hi Vanessa

Where in South Africa (Gauteng) can I buy a lcd display replacement screen for this Kodak easyshare v1003 camera?

Wickus: +27725966377/ vwickus@ymail.com

vwickus - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 17

Todo El Tiempo: 693