Saltar al contenido principal

Kodak Easyshare C813 LCD Replacement

Qué necesitas

  1. Kodak Easyshare C813 LCD Replacement, Battery: paso 1, imagen 1 de 1
    • Turn off camera by firmly pressing the power button that is located on the top of the camera near the selector dial.

  2. Kodak Easyshare C813 LCD Replacement: paso 2, imagen 1 de 3 Kodak Easyshare C813 LCD Replacement: paso 2, imagen 2 de 3 Kodak Easyshare C813 LCD Replacement: paso 2, imagen 3 de 3
    • Press thumb firmly on battery door and slide it in the direction of the arrow.

    • Lift thumb allowing the door to swing open.

  3. Kodak Easyshare C813 LCD Replacement, Back Cover: paso 3, imagen 1 de 1
    Herramienta utilizada en este paso:
    Anti-Static Wrist Strap
    $7.95
    Comprar
  4. Kodak Easyshare C813 LCD Replacement: paso 4, imagen 1 de 1
    • Turn the camera off by firmly pressing the power button located on top of the camera.

  5. Kodak Easyshare C813 LCD Replacement: paso 5, imagen 1 de 3 Kodak Easyshare C813 LCD Replacement: paso 5, imagen 2 de 3 Kodak Easyshare C813 LCD Replacement: paso 5, imagen 3 de 3
    • Locate the 7 screws holding the back cover on.

    • Three screws are located on the bottom of the camera.

    • Two screws are located on the side shown in the photograph.

    • Two final screws are located on the opposite side shown in the photograph.

  6. Kodak Easyshare C813 LCD Replacement: paso 6, imagen 1 de 3 Kodak Easyshare C813 LCD Replacement: paso 6, imagen 2 de 3 Kodak Easyshare C813 LCD Replacement: paso 6, imagen 3 de 3
    Herramienta utilizada en este paso:
    Phillips #00 Screwdriver
    $5.49
    Comprar
    • Remove all 7 screws:

    • Hold the camera firmly with one hand so that you can still see a screw.

    • Place the Philips 00(Found here)screwdriver into the screw.

    • Turn the screwdriver to the left until it is free.

    • Repeat for the remaining screws.

  7. Kodak Easyshare C813 LCD Replacement: paso 7, imagen 1 de 3 Kodak Easyshare C813 LCD Replacement: paso 7, imagen 2 de 3 Kodak Easyshare C813 LCD Replacement: paso 7, imagen 3 de 3
    • Use plastic opening tools to slightly open the side of the case.

    • Insert a plastic opening tool and apply pressure to the internal three tabs at the top.

    • The first two are near the words "3X Optical Zoom".

    • The third is near the shutter button.

  8. Kodak Easyshare C813 LCD Replacement: paso 8, imagen 1 de 3 Kodak Easyshare C813 LCD Replacement: paso 8, imagen 2 de 3 Kodak Easyshare C813 LCD Replacement: paso 8, imagen 3 de 3
    • Gently pull apart the back cover from the rest of the camera.

    • Make sure there are no more screws or tabs keeping the cover on.

    • Use the plastic opening tool to separate any sides still closely connected.

  9. Kodak Easyshare C813 LCD Replacement, Front Cover: paso 9, imagen 1 de 2 Kodak Easyshare C813 LCD Replacement, Front Cover: paso 9, imagen 2 de 2
    • Open the battery door.

    • Press thumb firmly on battery door and slide it in the direction of the arrow.

    • Lift thumb allowing the door to swing open.

    The battery door on my easyshare c813 is broken. How can i get a replacement door?

    paul chadwell - Contestar

  10. Kodak Easyshare C813 LCD Replacement: paso 10, imagen 1 de 3 Kodak Easyshare C813 LCD Replacement: paso 10, imagen 2 de 3 Kodak Easyshare C813 LCD Replacement: paso 10, imagen 3 de 3
    • Use the plastic opening tool to lift the casing around the shutter button.

    • Gently remove the front cover from the device.

  11. Kodak Easyshare C813 LCD Replacement: paso 11, imagen 1 de 1
    • Do not touch the terminals shown in the photo. These link to the capacitor which could shock you if not discharged.

    • To discharge the capacitor follow this guide.

  12. Kodak Easyshare C813 LCD Replacement, LCD: paso 12, imagen 1 de 3 Kodak Easyshare C813 LCD Replacement, LCD: paso 12, imagen 2 de 3 Kodak Easyshare C813 LCD Replacement, LCD: paso 12, imagen 3 de 3
    • Once the front cover is removed, the battery door maybe closed for convenience.

    • Locate the exposed portion of the LCD screen.

    • Use a wedge to free the LCD screen from the medal housing.

    • Do not pull the screen away completely, it is still attached to the logic board via the yellow cable.

  13. Kodak Easyshare C813 LCD Replacement: paso 13, imagen 1 de 1
    • Remove the screw at the upper right corner of the metal housing.

  14. Kodak Easyshare C813 LCD Replacement: paso 14, imagen 1 de 3 Kodak Easyshare C813 LCD Replacement: paso 14, imagen 2 de 3 Kodak Easyshare C813 LCD Replacement: paso 14, imagen 3 de 3
    • Locate the 2 solder joints holding down the medal housing.

    • Remove the solder.

    • Place wick on solder.

    • Place solder iron on wick

    • The wick should be sandwiched between the iron and the solder.

  15. Kodak Easyshare C813 LCD Replacement: paso 15, imagen 1 de 3 Kodak Easyshare C813 LCD Replacement: paso 15, imagen 2 de 3 Kodak Easyshare C813 LCD Replacement: paso 15, imagen 3 de 3
    • Peel back the black tape from the metal housing.

    • Lift the metal housing from the left so that it hinges on its right side.

    • The metal housing is still loosely attached on its right side.

  16. Kodak Easyshare C813 LCD Replacement: paso 16, imagen 1 de 3 Kodak Easyshare C813 LCD Replacement: paso 16, imagen 2 de 3 Kodak Easyshare C813 LCD Replacement: paso 16, imagen 3 de 3
    • Locate black tab holding the LCD screen connector in the port.

    • Use wedge or fingernail to lift the black tab.

    • Pull the the LCD screen connector out of the port.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Equipo

Cal Poly, Team 24-22, Regan Spring 2010 Miembro de Cal Poly, Team 24-22, Regan Spring 2010

CPSU-REGAN-S10S24G22

4 Miembros

20 Guías creadas

Un comentario

De sluiterknop werkt niet altijd, hoe is dit op te lossen?

Jacobus Rijken - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 13,066