Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Kodak EasyShare M381 Back Panel Frame Replacement

Introducción

The colored panel of this camera can easily become cracked or damaged. This guide will show you how to remove it, so you can easily replace it.

Qué necesitas

  1. Kodak EasyShare M381 Back Panel Frame Replacement, Battery: paso 1, imagen 1 de 2 Kodak EasyShare M381 Back Panel Frame Replacement, Battery: paso 1, imagen 2 de 2

    • First, press in and slide forward the battery latch as indicated by the arrow.

    Traducir

  2. Kodak EasyShare M381 Back Panel Frame Replacement: paso 2, imagen 1 de 1

    • Press down on battery until you hear a click and release it. Battery should easily slide out.

    Traducir

  4. Kodak EasyShare M381 Back Panel Frame Replacement, Back Panel Frame: paso 3, imagen 1 de 3 Kodak EasyShare M381 Back Panel Frame Replacement, Back Panel Frame: paso 3, imagen 2 de 3 Kodak EasyShare M381 Back Panel Frame Replacement, Back Panel Frame: paso 3, imagen 3 de 3

    • Obtain screwdriver, and remove the 3.85 mm frame screws as highlighted.

    • Using a magnetized surface to keep from losing screws may be very helpful.

    Traducir

  5. Kodak EasyShare M381 Back Panel Frame Replacement: paso 4, imagen 1 de 2 Kodak EasyShare M381 Back Panel Frame Replacement: paso 4, imagen 2 de 2

    • After screws are removed, using both hands, carefully pull the frame apart from the camera as indicated.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 269