Saltar al contenido principal

Introducción

The colored panel of this camera can easily become cracked or damaged. This guide will show you how to remove it, so you can easily replace it.

  1. First, press in and slide forward the battery latch as indicated by the arrow. First, press in and slide forward the battery latch as indicated by the arrow.
    • First, press in and slide forward the battery latch as indicated by the arrow.

  2. Press down on battery until you hear a click and release it. Battery should easily slide out.
    • Press down on battery until you hear a click and release it. Battery should easily slide out.

  3. Obtain screwdriver, and remove the 3.85 mm frame screws as highlighted. Using a magnetized surface to keep from losing screws may be very helpful. Using a magnetized surface to keep from losing screws may be very helpful.
    • Obtain screwdriver, and remove the 3.85 mm frame screws as highlighted.

    • Using a magnetized surface to keep from losing screws may be very helpful.

  4. After screws are removed, using both hands, carefully pull the frame apart from the camera as indicated. After screws are removed, using both hands, carefully pull the frame apart from the camera as indicated.
    • After screws are removed, using both hands, carefully pull the frame apart from the camera as indicated.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 117