Saltar al contenido principal

Kodak EasyShare M2008 Device Casing Replacement

Qué necesitas

  1. Kodak EasyShare M2008 Device Casing Replacement, Battery: paso 1, imagen 1 de 2 Kodak EasyShare M2008 Device Casing Replacement, Battery: paso 1, imagen 2 de 2
    • Place thumb firmly on battery cover.

    • Slide thumb right, the cover should follow and pop up.

  2. Kodak EasyShare M2008 Device Casing Replacement: paso 2, imagen 1 de 2 Kodak EasyShare M2008 Device Casing Replacement: paso 2, imagen 2 de 2
    • Place thumb on orange tab and pull back towards screen.

    • The battery should pop up.

    • Gently lift battery out.

  3. Kodak EasyShare M2008 Device Casing Replacement, Device Casing: paso 3, imagen 1 de 3 Kodak EasyShare M2008 Device Casing Replacement, Device Casing: paso 3, imagen 2 de 3 Kodak EasyShare M2008 Device Casing Replacement, Device Casing: paso 3, imagen 3 de 3
    • Remove screws from along outer edge of casing.

    • There are 6 screws in total.

    • Righty tighty, lefty loosey!

  4. Kodak EasyShare M2008 Device Casing Replacement: paso 4, imagen 1 de 3 Kodak EasyShare M2008 Device Casing Replacement: paso 4, imagen 2 de 3 Kodak EasyShare M2008 Device Casing Replacement: paso 4, imagen 3 de 3
    • Gently lift off front and back casing.

  5. Kodak EasyShare M2008 Device Casing Replacement: paso 5, imagen 1 de 3 Kodak EasyShare M2008 Device Casing Replacement: paso 5, imagen 2 de 3 Kodak EasyShare M2008 Device Casing Replacement: paso 5, imagen 3 de 3
    • Remove screws along side.

    • Gently peel off side casing.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Kyanna

Miembro Desde 03/13/14

313 Reputación

3 Guías creadas

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 7

Ultimos 30 días: 8

Todo El Tiempo: 159