Introducción

If the LCD screen is damaged or broken, you may want to remove it and repair or replace it.

Partes

No se requieren partes.

  1. Open the battery cover.
    • Open the battery cover.

    Agregar Comentario

  2. Slide the orange latch sideways to eject the battery.
    • Slide the orange latch sideways to eject the battery.

    • Remove the battery.

    Agregar Comentario

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Remove 7 screws.

      • 1 (6.25 mm) screw located on the top right corner, next to the view screen.

      • 4 (4.45mm) screws on the bottom of the camera.

      • 2 (2.95mm) screws on the left side of the camera.

    Agregar Comentario

    • There will be 2 (5.39mm) screws. Remove the screws in order to remove the lanyard.

    Agregar Comentario

    • Remove the rear camera casing.

    • Remove the front casing.

    Agregar Comentario

    • Flip up the LCD screen to reveal the two orange ribbon cables.

    • Disconnect the two ribbons cables from their sockets on the motherboard.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Equipo

Cal Poly, Team 2-8, Johann Summer 2010 Miembro de Cal Poly, Team 2-8, Johann Summer 2010

CPSU-JOHANN-R10S2G8

5 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 1,129