Introducción

Remove damaged case and replace with new casing.

Partes

No se requieren partes.

  1. Remove 7 screws. 1 (6.25 mm) screw located on the top right corner, next to the view screen. 4 (4.45mm) screws on the bottom of the camera.
    • Remove 7 screws.

    • 1 (6.25 mm) screw located on the top right corner, next to the view screen.

    • 4 (4.45mm) screws on the bottom of the camera.

    • 2 (2.95mm) screws on the left side of the camera.

  2. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  3. There will be 2 (5.39mm) screws. Remove the screws in order to remove the lanyard. There will be 2 (5.39mm) screws. Remove the screws in order to remove the lanyard. There will be 2 (5.39mm) screws. Remove the screws in order to remove the lanyard.
    • There will be 2 (5.39mm) screws. Remove the screws in order to remove the lanyard.

  4. Remove the rear camera casing. Remove the front casing.
    • Remove the rear camera casing.

    • Remove the front casing.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Michael

Miembro Desde 24/06/10

63 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 2-8, Johann Summer 2010 Miembro de Cal Poly, Team 2-8, Johann Summer 2010

CPSU-JOHANN-R10S2G8

5 Miembros

8 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 1,641