Saltar al contenido principal

KitchenAid KSM150PSER Power Cord Replacement

Qué necesitas

  1. KitchenAid KSM150PSER Power Cord Replacement, Power Cord: paso 1, imagen 1 de 2 KitchenAid KSM150PSER Power Cord Replacement, Power Cord: paso 1, imagen 2 de 2
    • Using a Phillips #2 screwdriver, remove the 10mm screw on the back cover by rotating it counterclockwise.

    • The back cover is now free. Remove it by pulling back and up on the cover.

  2. KitchenAid KSM150PSER Power Cord Replacement: paso 2, imagen 1 de 2 KitchenAid KSM150PSER Power Cord Replacement: paso 2, imagen 2 de 2
    • Using a Phillips #2 screwdriver, remove the 5mm screws holding the trimband to the top housing by rotating them counterclockwise.

    • Pull the trimband off the housing by grabbing each side and pulling it off the front.

  3. KitchenAid KSM150PSER Power Cord Replacement: paso 3, imagen 1 de 2 KitchenAid KSM150PSER Power Cord Replacement: paso 3, imagen 2 de 2
    • Using a Phillips #2 screwdriver, remove the 12mm screw holding the grounding wire in place by rotating it counterclockwise.

    • Using pliers or tweezers, remove the connectors attached to the white and black wires.

  4. KitchenAid KSM150PSER Power Cord Replacement: paso 4, imagen 1 de 2 KitchenAid KSM150PSER Power Cord Replacement: paso 4, imagen 2 de 2
    • Using a screwdriver, pull the cord string relief out of the mixer by putting it behind the cord and pulling away from the mixer until it is free.

    • Remove the cord from the mixer body.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Max Prohorov

Miembro Desde 01/24/18

109 Reputación

1 Guía escrita

Equipo

Cal Poly, Team S2-G5, Livingston Winter 2018 Miembro de Cal Poly, Team S2-G5, Livingston Winter 2018

CPSU-LIVINGSTON-W18S2G5

4 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 9

Ultimos 30 días: 51

Todo El Tiempo: 3,967